VIDEO:
30 SECOND
PART BUILDER
EXPLAINED
HRSE, General Use Compact Chiller, Basic, 100VAC
The HRSE recirculating chiller is a basic version of HRS featuring air cooled refrigerant and omitting the heating function. Three cooling capacities are available. The operator interface includes an easy-fill fluid tank with level check, intuitive keypad and digital display, and tool free filter removal. This model is compatible with single phase 100 VAC 50/60Hz power.
- Air cooled only, without heating feature
- Cooling capacities: 1.2 kW, 1.6 kW (at 60Hz)
- Temperature range setting: 10 to 30°C
- Temperature stability: ±2°C
- Power supply requirement: single phase 100 VAC, 50/60Hz
- Standards: RoHS
- Circulating fluid: Tap water or 15% ethylene glycol solution
How to order
RoHS
How to Order
Single-phase 100 VAC
HRSE A018 10
Cooling capacity
012
Cooling capacity 1000/1200 W (50/60 Hz)
018
Cooling capacity 1400/1600 W (50/60 Hz)
Cooling method
A
Air-cooled refrigeration
Option
Symbol Option
Nil
None
T
High pressure pump mounted
Note)
Note) The cooling capacity will decrease by about 100 W from the value in the catalog.
The performance is different between product models. Make sure to check the
pump capacity before selecting models.
Power supply
Symbol Power supply
10
Single-phase 100 VAC (50/60 Hz)
Specifications
Model
HRSE012-A-10-(T) HRSE018-A-10-(T)
Cooling method Air-cooled refrigeration
Refrigerant R407C (HFC)
Refrigerant charge kg 0.3 0.32
Control method Compressor ON/OFF
Ambient temperature/Humidity/Altitude
Note 1), 11)
Temperature: 5 to 35°C, Humidity: 30 to 70%, Altitude: less than 3000 m
Circulating
fluid system
Circulating fluid
Note
2)
Tap water, 15% ethylene glycol aqueous solution
Set temperature range
Note 1)
°C
10 to 30
Cooling capacity
Note 3), 11)
(50/60 Hz)
W
1000/1200
For option -T: 900/1100
1400/1600
For option -T: 1300/1500
Temperature stability
Note 4)
°C ±2
Pump capacity
(50/60 Hz)
Note 5)
MPa
0.08 (at 7 L/min)/0.11 (at 7 L/min)
For option -T: 0.13 (at 7 L/min)/0.18 (at 7 L/min)
Rated flow
(50/60 Hz)
Note 6)
L/min 7/7
Tank capacity L Approx. 5
Port size Rc1/2
Fluid contact material
Stainless steel, Copper (Heat exchanger brazing), Bronze, Brass, Ceramic, Carbon, PP, PE, POM, EPDM, PVC
Electrical
system
Power supply
Single-phase 100 VAC 50/60 Hz
Allowable voltage range ±10%
Fuse A 15
Power cable size
Note
10)
— 3 cores x 14 AWG (2.0 mm
2
), 3 m
Applicable earth leakage breaker capacity
Note 7)
A 15
Rated operating current
(50/60 Hz)
Note 3)
A
7.1/7.8
For option -T: 7.8/8.4
7.1/7.8
For option -T: 7.8/8.4
Rated power consumption
(50/60 Hz)
Note 3)
kVA
0.53/0.54
For option -T: 0.62/0.62
0.63/0.63
For option -T: 0.72/0.72
Dimensions
Note 8)
mm
W377 x D435 x H615
For option -T: W377 x D500 x H615
Accessories Fitting (for drain outlet) 1 pc., Operation Manual (for installation/operation) 1
Weight
Note 9)
kg
32
For option -T: 39
Note 1) It should have no condensation. During seasons or in locations where the ambient temperature is likely to fall below freezing point, please contact
SMC for that case.
Note 2) If tap water is used, use water that conforms to Water Quality Standards of the Japan Refrigeration and Air Conditioning Industry Association (JRA
GL-02-1994 cooling water system - circulating type - make-up water).
Note 3) q Ambient temperature: 25°C, w Circulating fluid temperature: 20°C, e Circulating fluid rated flow, r Circulating fluid: Tap water
Note 4) Temperature at the thermo-chiller outlet when the circulating fluid flow is rated flow, and the circulating fluid outlet and return port are directly
connected. Installation environment and the power supply are within specification range and stable.
Note 5) The capacity at the thermo-chiller outlet when the circulating fluid temperature is 20°C.
Note 6) Required flow rate for cooling capacity or maintaining the temperature stability. The specification of the cooling capacity and the temperature stability
may not be satisfied if the flow rate is lower than the rated flow.
Note 7) Purchase an earth leakage breaker with current sensitivity of 15 mA or 30 mA/power supply 100 VAC separately.
Note 8) Dimensions between panels, not including the dimensions of protrusion.
Note 9) Weight in the dry state without circulating fluids.
Note 10) Cable terminal is provided with a plug with ground terminal (JIS C 8303 Plug for the receptacle with dipoles grounding electrode).
Note 11)
If the product is used at altitude of 1000 m or higher, refer to “Operating Environment/Storage Environment” (page 210) Item 14 “* For altitude of 1000 m or higher”.
* There are different values from standard specifications.
Thermo-chiller
Basic Type
HRSE Series
198
A
Related Products
Email Part
Email How to Order Page
Products
- Actuators
-
Directional Control Valves
- Directional Control Valves Overview
- Solenoid Valves - 4 & 5 Port
- Solenoid Valves - 3 Port
- Solenoid Valves - Direct Operated
- Industrial Communication
- Air Operated Valves
- Mechanical & Hand Operated Valves
- Safety Pressure Relief Valves
- Solenoid Valves - ISO
- Clean Room Products
- Valve Manifold Configurator
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Vacuum Products
- Industrial Communication
- Sensors & Switches
- Fluid Process
- Static Control
- Electric Actuators
- Chillers
- Process Gas Equipment
- High Vacuum
- Chemical Handling Equipment
- Secondary Battery