VIDEO:
30 SECOND
PART BUILDER
EXPLAINED
IZN10E, Ionizer, Nozzle Type
The IZN10E is SMC's nozzle ionizer. The nozzle ionizer emits an air-assisted cone of static eliminating ions for focused targets 2 inches or smaller, up to 20 inches away. The nozzle can be used with an optional sensor and monitor to suspend emission when static elimination is complete, or when the target is not present. Available with a high flow or enery saving nozzle, or female threads to attach an accessory. The cartridge can be removed without tools for needle cleaning or replacement. Slim, compact design is suitable for installation in tight spaces.
- Ion balance to +/-10v (range dependent)
- Operates from 24VDC, with internal high voltage power supply for ion generation
- Available manifold and bracket mounting styles
- Electrode needle contamination detector built in
- Available diffusion nozzles, or straight or bendable bar nozzles
- Meets CE, UL, CSA and RoHS standards
How to order
Nozzle, Fitting
Ionized air
Emitter periphery
Emitter
Female threads for piping
Compressed air
How to Order
01 PIZN10E 06 Z B1
High frequency AC nozzle type
Nozzle type
Symbol Type
01
Energy saving static neutralization nozzle
02
High flow rate nozzle
11
Female threads for piping
*
1
*1 Refer to the cautions when using the female threads for
piping shown below.
Input/Output specifications
Symbol Type
Nil
NPN input/output
P
PNP input/output
Power supply cable
Symbol Type Part no.
Nil
With power supply cable (3 m) IZN10E-CP
Z
With power supply cable (10 m) IZN10E-CPZ
N
Without power supply cable —
*
Mounting is interchangeable with the current model (IZN10).
Port size (One-touch fitting)
Symbol Type
06
ø6: Metric size
One-touch
fitting
07
ø6.35 (1/4"): Inch size
16
ø6: Metric size (Elbow)
One-touch
fitting
17
ø6.35 (1/4"): Inch size (Elbow)
Bracket
Symbol Type Part no.
Nil
None —
B1
L-bracket IZN10-B1
B2
Pivoting bracket IZN10-B2
B3
DIN rail mounting bracket IZN10-B3
*
Refer to page 12. Brackets are the same as those for the
current model (IZN10). Mounting is interchangeable.
Cautions when using the IZN10E-11mmm-m female threads for piping
Sectional view of the female threads for piping
· For the female thread (Rc1/8) type, a custom made nozzle or fittings/tubing
combination must be prepared and connected by the user.
·
If a nozzle with discharge port diameter or tubing with an I.D. of less than 4 mm is
connected, the air pressure inside the nozzle may increase depending on the configuration.
·
This product uses a high frequency AC voltage. If the air pressure around the emitter
increases during ion generation, the ion generation efficiency decreases and the maintenance
alarm (signal output, maintenance LED) will be activated (refer to the figure to the right).
·
When the maintenance alarm is generated, the static neutralization performance is decreased.
· The table below shows the supply pressure specifications when made-to-order
nozzles and fittings/tubing combinations are connected.
· When using piping materials prepared by the user, secure an air passage of 4 mm or more inside diameter. If using tubing, ensure the minimum bending radius is
used and keep the tube length to 500 mm or less.
· Please install so as not to receive a moment force on the nozzle (page 25).
Made-to-order nozzle product names/Piping examples Made-to-order nozzle part no. (page 23) Supply pressure specifications
Circular diffusion nozzle IZN10-G-X198 0.05 to 0.1 MPa
Flat diffusion nozzle IZN10-G-X199 0.05 to 0.1 MPa
Bar nozzle (straight type) IZN10-G-m-X216 0.05 to 0.1 MPa
Circumferential jet bar nozzle (straight type) IZN10-G-X278 0.05 to 0.15 MPa
Bender tube nozzle IZN10-G-m-X205 0.05 to 0.15 MPa
Long nozzle IZN10-G-m-X226 0.05 to 0.15 MPa
Fitting (Applicable tubing O.D. 6 mm) + Tube (O.D. 6 mm, I.D. 4 mm)
*
1
— 0.05 to 0.1 MPa
Fitting (Applicable tubing O.D. 8 mm) + Tube (O.D. 8 mm, I.D. 5 mm)
*
1
— 0.05 to 0.3 MPa
*1 When connecting the tubing, use a length of tubing 500 mm or less for the connection, regardless of the inside diameter size.
Nozzle Type Ionizer
IZN10E Series
Energy saving
static
neutralization
nozzle
High flow
rate nozzle
Female threads
for piping
Made to Order
(For details, refer to page 21.)
Symbol Specifications
-X367
Nozzle with right angles
®
10
Email Part
Email How to Order Page
Products
- Actuators
-
Directional Control Valves
- Directional Control Valves Overview
- Solenoid Valves - 4 & 5 Port
- Solenoid Valves - 3 Port
- Solenoid Valves - Direct Operated
- Industrial Communication
- Air Operated Valves
- Mechanical & Hand Operated Valves
- Safety Pressure Relief Valves
- Solenoid Valves - ISO
- Clean Room Products
- Valve Manifold Configurator
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Vacuum Products
- Industrial Communication
- Sensors & Switches
- Fluid Process
- Static Control
- Electric Actuators
- Chillers
- Process Gas Equipment
- High Vacuum
- Chemical Handling Equipment
- Secondary Battery