VIDEO:
30 SECOND
PART BUILDER
EXPLAINED
IDK, Moisture Control Tubing (Fluoropolymer)
SMC's IDK series is a moisture control tube. Condensation in a pneumatic system will cause operating failure and affect the life of pneumatic equipment. The IDK prevents condensation in small cylinders, air grippers, and air operated valves by diffusing water vapor in the piping to the outside before it is condensed.
- Applicable tubing O.D.: Ø 2 to Ø 6 mm
- Two shapes: linear and coil
- Tube effective lengths: 100 and 200 mm.
How to order
R
∗2
Inner sleeve
Specifications
Series IDK
Fluid
Max. operating pressure
Operating temperature (°C)
Operating environment
∗1
Min. bending radius
∗2
(mm)
O.D. (mm)
I.D. (mm)
Quantity of moisture
control tubes
Accessories
Color
Applicable fittings
Material
IDK02
10
2
1.2
Model
IDK04
Compressed air
0.7 MPa
0 to 40 (No freezing)
Indoors, where product is not exposed to water (0 to 40°C, Relative humidity 0 to 75%RH)
20
4
2.5
2 pcs.
Inner sleeve 4 pcs. (already mounted into tube)
KQ2, KJ
Fluoropolymer
IDK06
40
6
4
Note 1) Use the moisture control tube in a line with a refrigerated air dryer and a mist separator installed
in the upstream compressed air line. The condensation prevention performance may be lowered
depending on the quality of the supply compressed air (oil, dew point).
Note 2) The inner sleeve is already mounted and cannot be removed. If the inner sleeve comes off,
re-insert the sleeve before mounting the fitting.
Note 3) Do not cut the tube.
∗1 Use the product in an operating environment where humidity is
as low as possible.
∗2 The value at which the moisture control tube is bent or flattened at 20°C.
Be careful not to bend or flatten the tube and the inner sleeve even if the
value is more than the minimum bending radius.
How to Order
Made to Order
If you require the moisture control tube with an effective length not listed in the above table, please contact SMC.
IDK
Moisture control
tube effective length
02 100
Symbol
100
200
Effective length
100 mm
200 mm
Unit: mm
Moisture control
tube O.D.
Symbol
02
04
06
O.D.
2 mm
4 mm
6 mm
Dimensions
IDK02-100
IDK02-200
IDK04-100
IDK04-200
IDK06-100
IDK06-200
Model
Full
length
L
120
220
140
240
140
240
Nominal
effective length
X
100
200
100
200
100
200
O.D. x I.D.
D
2 x 1.2
4 x 2.5
6 x 4
L
X
Inner sleeve
D
Moisture Control Tube
Transparent
Color will change to brown over time,
but the functions are not affected.
Note) Dimensions at 40% relative humidity.
Dimensions may change if the relative humidity
changes.
1
Email Part
Email How to Order Page
Products
- Actuators
-
Directional Control Valves
- Directional Control Valves Overview
- Solenoid Valves - 4 & 5 Port
- Solenoid Valves - 3 Port
- Solenoid Valves - Direct Operated
- Industrial Communication
- Air Operated Valves
- Mechanical & Hand Operated Valves
- Safety Pressure Relief Valves
- Solenoid Valves - ISO
- Clean Room Products
- Valve Manifold Configurator
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Vacuum Products
- Industrial Communication
- Sensors & Switches
- Fluid Process
- Static Control
- Electric Actuators
- Chillers
- Process Gas Equipment
- High Vacuum
- Chemical Handling Equipment
- Secondary Battery